STS-105 was a mission of the Space Shuttle Discovery to the International Space Station, launched from Kennedy Space Centre, Florida, 10 August 2001. This mission was Discovery's final mission until STS-114, because Discovery was grounded for a refit, and then all Shuttles were grounded in the wake of the Columbia disaster. The refit included an update of the flight deck to the glass cockpit layout, which was already in use on the Space Shuttle Atlantis.

(Fourth Space Flight)

Frederick W. Sturckow

(First Space Flight) Mission Specialist 1:

(Third Space Flight) Mission Specialist 2:

Patrick G. Forrester

(Third Space Flight) Mission Specialist 3:

Frank L. Culbertson Jr.

Yury V. Usachev, RKA Exp. 2

(Fourth Space Flight) - Mission Specialist 4:

Mikhail Turin, RKA Exp. 3

(First Space Flight) ISS Flight Engineer - Mission Specialist 4:

James S. Voss Exp. 3

(Fifth Space Flight) ISS Flight Engineer - Mission Specialist 5:

Vladimir N. Dezhurov, RKA Exp. 3

(Second Space Flight) ISS Soyuz Commander - Mission Specialist 5:

Susan J. Helms Exp. 2

(Fifth Space Flight) ISS Science Flight Engineer

(Second Space Flight)

A free template by Lucknowwebs.com for WYSIWYG WebBuilder 8

Science Research

Science Research

Science Theories

Designed by Nigel G Wilcox

Pages within this section: USA Shuttle Mission Flights

Pages within this section:

The Space Shuttle Missions

Aboard Leonardo were six Resupply Stowage Racks, four Resupply Stowage Platforms, and two new scientific experiment racks for the station's U.S. laboratory Destiny. The two new science racks (EXPRESS Racks 4 and 5) added further science capability to the station. EXPRESS stands for Expedite the Processing of Experiments to the Space Station. EXPRESS Rack 4 weighs 533 kilograms (1,175 lb) and EXPRESS Rack 5 weighs 544 kilograms (1,199 lb). The empty weight of each EXPRESS rack is about 356 kilograms (785 lb). EXPRESS Racks 1 and 2A were delivered aboard the Raffaello cargo module during STS-100/6A in April 2001. EXPRESS Rack 3 was brought to the station during STS-111 in 2002. The racks were manufactured at the Space Station Processing Facility.

The Resupply Stowage Racks and Resupply Stowage Platforms were filled with Cargo Transfer Bags that contain equipment and supplies for the station. The six Resupply Stowage Racks contained almost 1,451 kilograms (3,199 lb) of cargo and the four Resupply Stowage Platforms contained about 544 kilograms (1,199 lb) of cargo, not including the weight of the Cargo Transfer Bags, the foam packing around the cargo or the straps and fences that held the bags in place. The total weight of cargo, racks and packing material aboard Leonardo was just over 4,990 kilograms (11,000 lb). Total cargo weight was about 3,073 kilograms (6,775 lb).

Also carried in the payload bay was an Integrated Cargo Carrier (ICC) carrying the Early Ammonia Servicer and MISSE PECs 1 & 2.

Another payload on board is the Materials International Space Station Experiments (MISSE). This project was a NASA/Langley Research Center-managed cooperative endeavor to fly materials and other types of space exposure experiments on the space station. The objective was to develop early, low-cost, non-intrusive opportunities to conduct critical space exposure tests of space materials and components planned for use on future spacecraft. Johnson Space Center, Marshall Space Flight Center, Glenn Research Center, the Materials Laboratory at the Air Force Research Laboratory and Boeing Phantom Works were participants with Langley in the project. The MISSE experiments were the first externally mounted experiments conducted on the ISS. The experiments were in four Passive Experiment Containers (PECs) that were initially developed and used for an experiment on Mir in 1996 during the Shuttle-Mir Program. The PECs were transported to Mir on STS-76. After an 18-month exposure in space, they were retrieved on STS-86. PECs are suitcase-like containers for transporting experiments via the space shuttle to and from an orbiting spacecraft. Once on orbit and clamped to the host spacecraft, the PECs are opened and serve as racks to expose experiments to the space environment.

The main purpose of STS-105 was the rotation of the International Space Station crew and the delivery of supplies utilizing the Italian-built Multi Purpose Logistics Module (MPLM) Leonardo on its second flight (STS-102, STS-105). The crew also performed two spacewalks and conducted scientific experiments. The Multi Purpose Logistics Module (MPLM) taken on STS-105 contained additional scientific racks, equipment and supplies. It is 6.4 meters (21 feet) long and 4.6 meters (15 feet) in diameter and has a dry mass of over 4,082 kilograms (8,999 lb). An identical module named Raffaello has flown twice (STS-100 and, later, STS-108).