© Copyright Reserved - United Kingdom
Ideal Screen Composition 1024 x 768

5 Series Beamer

 

fig. Boot - Rear Fuse Cluster

65a

65

Workshop

Contents Page

 

 

 

 

 

 

click

click

click

Diary of a Second Hand 17 year old Beamer (Maintenance - Battery Drain included...,
BMW E39 520i year 2000 Engine 1995cc)
M Series.

Workshop/Diary - Adjusting or Replacing
Parking/Emergency/Hand Brake

 

.

65b

Contintued....

To Release the handbrake cable from hub you may need to use a hammer and punch or screwdriver,  over time the metal collar on the brake cable will 'self seal'or fuse into the softer metal through weather and general grime and rust etc'

Note: This is not required

This model 2000 E39 does NOT have a retaining Clamp.You may find you will need to use some force to release the cable.

X

fig: Stock

fig: Stock Photo

fig: Stock Photo

fig: Stock Photo

Reassemble :
1.Refit shoes using the spring pins
2. Connect the hinged caliper to the cable
3.Re-attach adjuster on the bottom (note: direction)
4. Attach the upper and lower springs

fig: Stock Photo

Brake shoe adjuster

Checking the brake caliper is the right way around.
Check both shoes react when handbrake is placed on. If not, turn the hinged caliper around and then try again. This is important for full operational handbraking.

fig: Stock Photo

NOTE: Updated Procedures 2017 Page 65a +