© Copyright Reserved - United Kingdom
Ideal Screen Composition 1024 x 768
5 Series Beamer
fig. Boot - Rear Fuse Cluster
F
:D
Workshop
Contents Page
G:
click
click
click
Diary of a Second Hand 15 year old Beamer (Maintenance - Battery Drain included...,
BMW E39 520i year 2000 Engine 1995cc)
M Series.
Workshop/Diary - Torque Wrench
14th May 2015
fig.
fig.
Useful Tools
fig.
Specifications:
-28-210Nm
-+/- 4% Accuracy
-480mm Length
eBay: £18.25 Silverline
[Summerset Commercials]
click
A recent purchase of a torque wrench was initiated when I required a socket wrench for a specific job, I found I coudn't get a good leverage on the handle as it was too short and I needed to tighten a nut to a specific torque. I shopped around, eventually returning to the ebay site as many other suppliers were just too expensive. The one I chose is garunteed for life and the price was within my budget.
Operating Instructions:
1. Hold the wrench with the appropriate scale facing you and unlock the handle by rotating the
knurled locking screw anticlockwise.
2. Rotate the handle until the '0' mark aligns with the closest value below the torque required that is marked on the shaft.
3. To set to the exact value, rotate the handle slowly clockwise, observing
the handle markings. The torque settings is calculated by adding the numbers marked on the shaft and on the handle (e.g.:
If the shaft value is 112Nm and the handle is rotated until the '6' is aligned with the centre line, the torque setting is118Nm).
4. Locock the torque setting by rotating the knurled screw clockwise until finger tight.
Tightening and Fixing:
5. Install the correct socket or attachment to the square drive and apply to fixing. Tighten fixing slowly until you feel/hear the
wrench 'click'. Stop tightening at this point and release. The wrench will automatically reset for the next use.
Storage:
6. When the wrench is not in use, rotate the handle to the lowest torque setting, do not rotate handle below lowest setting.
7. The tool is a precision measuring instrument, rough handling may damage the tool and effect the accuracy.
8. If the wrench has not been used for some time, operate it several times at a low torque setting. This permits the internal
lubricant to recoat all working parts.
9. Store the wrench in its case in a dry place to avoid any corrosion
Maintenance:
10. The torque wrench has been callobrated before leaving the factory.
11. This is a precision measuring instrument, calibration and servicing must be performed regularly to ensure accuracy.
Servicing and calibration is the responsibility of the user and accuratcy is not part of the guarantee of the product.
12. Clean wrench using a soft brush/cloth. Do not allow wrench to get wet, or use any kind of cleaning fluid.
Proves to be good value for money with case, size converter head, extension bar and life time guarantee registered online.
![](images/img0459.jpg)
Features:
-1/2" drive chrome vanadium steel
-1.2" - 3/8" Converter
-125mm Extension Bar
-Conforms to EN ISO 6789 & Din 3120